Dell EMC PowerEdge R620 - Page 124

Error Code Message Information
Action Re-seat the memory modules. If the issue persists, see Getting Help.
PST0129
Message Memory is detected, but is not congurable.
LCD Message Memory is detected, but is not congurable. Check memory devices.
Details System BIOS detected memory, but was unable to congure the memory for system
operation.
Action Compare system memory installation to supported system memory congurations.
PSU0001
Message Power supply <number> failed.
LCD Message PSU <number> failed. Check PSU.
Action Remove and reinstall the power supply. If the issue persists, see Getting Help.
PSU0002
Message A predictive failure detected on power supply <number>.
LCD Message Predictive failure on PSU <number>. Check PSU.
Details System performance and power redundancy may be degraded or lost.
Action Remove and reinstall the power supply at the next service window. If the issue persists,
see Getting Help.
PSU0003
Message The power input for power supply <number> is lost.
LCD Message Power input for PSU <number> is lost. Check PSU cables.
Details The power supply is installed correctly but an input source is not connected or is not
functional.
Action Verify the input source is attached to the power supply. Verify the input power is within
the operating requirements for the power supply.
PSU0006
Message Power supply <number> type mismatch.
LCD Message Power supply <number> is incorrectly congured. Check PSU.
Details Power supplies should be of the same input type and power rating.
Action Install matched power supplies and review proper conguration in this manual.
PSU0016
Message Power supply <number> is absent.
LCD Message PSU <number> is absent. Check PSU.
Details The power supply has been removed or has failed.
Action
1 Remove and reinstall the power supply.
2 Check cables and subsystem components in the system for damage.
3 If the issue persists, see Getting Help.
124 System messages