Dell EMC PowerEdge R620 - Page 125

Error Code Message Information
PSU0031
Message Cannot communicate with power supply <number>.
LCD Message Cannot communicate with PSU <number>. Re-seat PSU.
Details The power supply may operate, however power supply monitoring is degraded. System
performance may be degraded.
Action Remove and reinstall the power supply. If the issue persists, see Getting Help.
PSU0032
Message The temperature for power supply <number> is in a warning range.
Details System performance may be degraded.
Action Check the system operating environment, including airow and inlet temperature. Check
system logs for temperature and thermal component failures.
PSU0033
Message The temperature for power supply <number> is outside of the allowable range.
LCD Message PSU <number> temperature outside of range. Check PSU.
Details System performance may be degraded.
Action Check the system operating environment, including airow and inlet temperature. Check
system logs for temperature and thermal component failures.
PSU0034
Message An under voltage fault detected on power supply <number>.
LCD Message An under voltage fault detected on PSU <number>. Check power source.
Details This failure may be the result of an electrical issue with cables or subsystem components
in the system.
Action
1 Remove and reinstall the power supply.
2 Check cables and subsystem components in the system for damage.
3 If the issue persists, see Getting Help.
PSU0035
Message An over voltage fault detected on power supply <number>.
LCD Message Over voltage fault on PSU <number>. Check PSU.
Action Check input power or reinstall the power supply. If the issue persists, see Getting Help.
PSU0036
Message An over current fault detected on power supply <number>.
LCD Message An over current fault detected on PSU <number>. Check PSU.
Details This failure may be the result of an electrical issue with cables or subsystem components
in the system.
Action
1 Remove and reinstall the power supply.
2 Check cables and subsystem components in the system for damage.
3 If the issue persists, see Getting Help.
System messages 125