EasyManua.ls Logo

Dell EMC PowerEdge R620 - Page 127

Dell EMC PowerEdge R620
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Code Message Information
RFM1008
Message Failure detected on Removable Flash Media <name>.
LCD Message Removable Flash Media <name> failed. Check SD Card.
Details An error was reported during a SD card read or write.
Action Reseat the ash media. If the problem persists, see Getting Help.
RFM1014
Message Removable Flash Media <name> is write protected.
LCD Message Removable Flash Media <name> is write protected. Check SD Card.
Details The card is write-protected by the physical latch on the SD card. A write-protected card
cannot be used.
Action If unintended, remove the media and disable write protection.
RFM1201
Message Internal Dual SD Module redundancy is lost.
LCD Message Internal Dual SD Module redundancy is lost. Check SD Card.
Details Either one or both the SD cards are not functioning properly.
Action See Getting Help.
RFM2001
Message Internal Dual SD Module <name> is absent.
LCD Message Internal Dual SD Module <name> is absent. Check SD Card.
Details The SD card module is not detected or not installed.
Action If unintended, reinstall the SD module.
RFM2002
Message Internal Dual SD Module <name> is oine.
Details The SD card module is installed but may be improperly installed or congured incorrectly.
Action Reinstall the SD module.
RFM2004
Message Failure detected on Internal Dual SD Module <name>.
LCD Message Internal Dual SD Module <name> failed. Check SD Card.
Details The SD card module is installed but improperly congured or failed to initialize.
Action Reinstall the SD module and remove and reinstall SD cards.
RFM2006
Message Internal Dual SD Module <name> is write protected.
Details The module is write-protected. Changes may not be written to the media.
Action If unintended, remove the media and disable write protection.
SEC0031
Message The chassis is open while the power is on.
LCD Message Intrusion detected. Check chassis cover.
System messages 127

Table of Contents

Related product manuals