Figure 10. Inside the system with rear drive configuration
1. Information tag
2. Drive backplane cover
3. Fan (6)
4. Memory module sockets
5. Heat sink
6. Internal PERC mini card and air shroud
7. Riser 1A (Low profile right riser)
8. Riser 2 (Low profile left riser)
9. Air shroud
10. Rear drive cage
11. Intrusion switch
12. System board
Locating the Express Service Code and Service
Tag
The unique Express Service Code and Service Tag is used to identify the system.
The information tag is located on the front of the system that includes system information such as Service Tag, Express Service Code,
Manufacture date, NIC, MAC address, QRL label, and so on. If you have opted for the secure default access to iDRAC, the Information tag
also contains the iDRAC secure default password. If you have opted for iDRAC Quick Sync 2, the Information tag also contains the
OpenManage Mobile (OMM) label, where administrators can configure, monitor, and troubleshoot the PowerEdge servers.
System overview
17
To Next Page
Loading...
