Dell 2135cn - Multifunction Color Laser Printer - Page 64


Time-Out
Purpose:
To specify the time (in seconds) the printer should wait for data to arrive from the computer. The print job is cancelled if the time-out duration is exceeded.
Values:

Clock Settings
Purpose:
To specify the date and time formats.
Values:

mm/inch
Purpose:
Specifies the default measurement unit displayed after the numeric value on the operator panel.
Values:

Auto Log Print
Purpose:
To automatically print a job history report after every 20 jobs.
Low Toner
Emits a tone when toner or some other consumable is low.
Medium*
High
Off
Does not emit a tone when toner or some other consumable is low.
Auto Clear Alert
Low
Emits a tone 5 seconds before the printer performs auto clear.

Medium
High
Off*
Does not emit a tone 5 seconds before the printer performs auto clear.
Base Tone
Low
Emits a tone when the operator panel display is returned to the default setting by scrolling the loop menu.
Medium
High
Off*
Does not emit a tone when the operator panel display is returned to the default setting by scrolling the loop menu.
All Tones
Low
Sets the volume of all the alert tones at once.

Medium*
High
Off
Disables all the alert tones.

30 sec*
Specifies the time the printer should wait for data to arrive from the computer.
5-300 sec
Off
Disables the job timeout.
Set Date
Sets the date depending on the Date Format settings.
Set Time
Sets the time.
Date Format
Sets the date format.
Time Format
24H*
Sets the time in the 24-hour format.
12H
Sets the time in the 12-hour format.
Time Zone
Sets the time zone.
mm
Selects millimeter as the default measurement unit.
inch
Selects inch as the default measurement unit.
NOTE: The default for mm/inch varies depending on other settings, such as Country and Document Size.
NOTE: Restart your printer when you change the settings for the RAM Disk menu.