Load Manual Feeder with [paper size] [orientation]
Try one or more of the following:
• Load the feeder with the correct size of paper.
• From the printer control panel, press to clear the message and continue printing.
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from
an automatically selected tray.
• Cancel the current job.
Load Manual Feeder with [paper type] [paper size] [orientation]
Try one or more of the following:
• Load the feeder with the correct size and type of paper.
• From the printer control panel, press to clear the message and continue printing.
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from
an automatically selected tray.
• Cancel the current job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, contact technical support or your Dell printer dealer,
and then report the message.
If necessary, press
on the printer control panel to clear the message and continue printing.
Maintenance kit nearly low [80.xy]
For more information, contact technical support or your Dell printer dealer, and then report the message.
If necessary, press
on the printer control panel to clear the message and continue printing.
Maintenance kit very low, [x] estimated pages remain [80.xy]
You may need to replace the maintenance kit very soon. For more information, contact technical support or your Dell
printer dealer.
If necessary, press
on the printer control panel to clear the message and continue printing.
Memory full [38]
Try one or more of the following:
• From the printer control panel, press to clear the message.
• Decrease the resolution setting.
Troubleshooting 173
To Next Page
Loading...
Need help?
General
