Dell D30M004 - Page 68

Table 5. System setup options—Advanced menu (continued)
Advanced
Default: Disabled
Overclocking Feature
Core Over Clocking Level# Allows you to configure the Core Over Clocking Level.
Default: Disabled
Customization
Core Ratio Limit Override Allows you to configure the Core Ratio Limit Override.
Core Voltage Override Allows you to configure the Core Voltage Override.
Long Duration PWR Limit Allows you to configure the Long Duration PWR Limit.
Short Duration PWR Limit Allows you to configure the Short Duration PWR Limit.
XMP Memory Allows you to configure the XMP Memory.
Default: Disabled
Maintenance
Data Wipe on next boot When enabled, the BIOS will schedule a data wipe cycle for
all storage devices that are connected to the system board on
the next reboot.
Default: Disabled
BIOS Recovery from Hard Drive Enables the computer to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive
or an external USB key.
NOTE: BIOS Recovery from Hard Drive is not available for
Self-encrypting drives (SED).
Default: Enabled
BIOS Auto-Recovery When enabled, the autorecovery will be performed if BIOS
image integrity check fails and there is a a recovery image on
the hard drive.
NOTE: BIOS Auto-Recovery is not possible from other
media.
Default: Disabled
SupportAssist System Resolution Controls the automatic boot flow for SupportAssist System
Resolution Console and for Dell operating system Recovery
tool.
Default: 2
Auto OS Recovery Threshold Allows you to configure the Auto OS Recovery Threshold.
Default: 2
SupportAssist OS Recovery Allows you to enable or disable the SupportAssist OS
Recovery.
Default: Enabled
Table 6. System setup options—Security menu
Security
Unlock Setup Status Displays the unlock setup status.
Default: Unlocked
Admin Password Status Displays whether the admin password is set.
68 System setup