Removing and Installing Parts 83
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before removing the cover.
NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page 85.
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 57.
2
Remove the drive panel (see page 74).
power cable
data cable
To Next Page
Loading...
