108 Removing and Installing Parts
5
Check all cable connections, and fold cables out of the way to avoid blocking airflow between the fan
and cooling vents.
6
Replace the drive panel (see "Replacing the Drive Panel" on page 89).
7
Replace the computer cover (see "Replacing the Computer Cover" on page 110).
NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
8
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
9
Enter system setup (see "System Setup" on page 115) and select the appropriate
Drive
option.
10
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 56).
1 power cable 2 data cable
1
2
To Next Page
Loading...
Need help?
General