Removing and Installing Parts 67
NOTICE: Ensure that you are working on a level, protected surface to avoid scratching either the computer or the
surface on which it is resting.
2
Lay your computer on its side with the computer cover facing up.
3
Pull back the cover latch release located on the top panel.
4
Grip the sides of the computer cover and pivot the cover up, using the bottom hinge tabs as leverage
points.
5
Release the cover from the hinge tabs and set it aside in a secure location.
1 cover latch release 2 computer cover 3 back of computer
4 bottom hinge tabs
2
1
3
4
To Next Page
Loading...
