8. Close the computer cover.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the
computer.
9. Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
CD/DVD Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in your
Owner's Manual.
Removing a CD/DVD Drive
1. Follow the instructions in "Before You Begin."
2. Open the computer cover.
3. Disconnect the power and CD/DVD drive cables from the back of the drive.
http://support.dell.com/support/edocs/systems/dimxpsg2/en/SM/parts.htm (17 of 37) [3/26/2008 3:57:09 PM]
To Next Page
Loading...
