Dell E33S001 - Storage Controller Specifications; Drive Specifications; Hard Drives; Optical Drive

Power supply
unit
Specication
Voltage
NOTE: This system is also designed to be connected to IT power systems with a phase-to-phase voltage
not exceeding 230 V.
100–240 V AC, autoranging, 50/60 Hz
Storage controller specications
Storage
controller
Specication
Storage controller
type
PERC H730, PERC H330, PERC H830, PERC S130.
NOTE: Your system supports software RAID S130 and a PERC card.
For more information on software RAID, see the Dell PowerEdge RAID Controller (PERC) documentation at
Dell.com/storagecontrollermanuals.
NOTE: The upgrade from embedded controller or Software RAID controller to Hardware RAID controller
is not supported.
Drive specications
Hard drives
The PowerEdge R230 system supports SAS, SATA, Nearline SAS hard drives and Solid State Drives (SSDs).
Drives
Specication
Four hard drive
systems
Up to four 3.5-inch cabled hard drives, or
Up to four 2.5-inch hot swappable SATA, or Nearline SAS hard drives in 3.5-inch adapters, or
Up to four 3.5-inch hot swappable SATA, or Nearline SAS hard drives
Two hard drive
systems
Up to two 3.5-inch cabled hard drives
Optical drive
The PowerEdge R230 system supports one optional slim SATA DVD-ROM drive or DVD+/-RW drive.
Ports and connectors specications
USB ports
The PowerEdge R230 system supports:
• USB 2.0-compliant ports on the front panel
Technical
specications 27