Figure 14. Removing the system cover
1
latch release lock 2 latch
3 system cover
Next step
Install the system cover.
Related links
Removing the optional front bezel
Installing the system cover
Installing the system cover
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
3 Ensure that all internal cables are connected and placed out of the way, and no tools or extra parts are left inside the system.
Steps
1 Align the slots on the system cover with the tabs on the chassis.
2 Push the system cover latch down.
The system cover slides forward and the slots on the system cover engage with the tabs on the chassis. The system cover latch locks
into place when the system cover is completely engaged with the tabs on the chassis.
3 Rotate the latch release lock clockwise to the locked position.
54
Installing and removing system components
To Next Page
Loading...
