EasyManua.ls Logo

Dell E33S001 - NIC Ports; Idrac8; Serial Connector; VGA Ports

Dell E33S001
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USB 3.0-compliant ports on the back panel
USB 3.0-compliant internal port
The following table provides more information about the USB specications:
Table 16. USB specications
System Front panel Back panel Internal
PowerEdge R230 Two 4-pin, USB 2.0-compliant
ports
Two 9-pin, USB 3.0-compliant port
One 9-pin, USB 3.0-compliant port
NIC ports
The PowerEdge R230 system supports two 10/100/1000 Mbps Network Interface Controller (NIC) ports on the back panel.
iDRAC8
The PowerEdge R230 system supports one optional dedicated 1 GbE Ethernet on the iDRAC Enterprise port card.
Serial connector
The serial connector connects a serial device to the system. The PowerEdge R230 system supports one serial connector on the back
panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R230 system supports two 15-
pin VGA ports one each on the front and back panels.
SD vFlash
The PowerEdge R230 system supports one optional SD vFlash memory card on the iDRAC Enterprise port card.
NOTE
: The card slot is available for use only if the iDRAC8 Enterprise license is installed on your system.
Internal Dual SD Module
The PowerEdge R230 system supports two optional ash memory card slots with an internal dual SD module.
NOTE
: One card slot is dedicated for redundancy.
Connectors specications
Back connectors
Specication
NIC Two 10/100/1000 Mbps
28 Technical specications

Table of Contents

Other manuals for Dell E33S001

Related product manuals