7 Connect to a Network
NOTE: To activate your mobile broadband service, please contact
the service provider with the following information:
Windows OS
a Select the Network icon from the taskbar and then select Cellular.
The Cellular page displays.
b Select your Mobile Broadband Carrier to expand the options.
c Select Advanced Options. The options are displayed.
d Make a note of the International Mobile Equipment Identity (IMEI)
and the Integrated Circuit Card Identifier (ICCID).
Ubuntu OS
Open the Terminal window.
a Go to super user mode by entering:$sudo su -
b Configure the Mobile Broadband connection profile:
#nmcli con add type gsm ifname ttyACM3 con-name
<connection name>
apn <apn>
user <user name>
password <password>
c Connect to the mobile network: #nmcli con up <connection
name>
To disconnect from the mobile network: #nmcli con down
<connection name>.
Wind River OS
a Configure the Mobile Broadband APN profile:
#uci set network.wwan.apn="<apn>"
#uci commit network
b Connect to the mobile network: #ifup wwan
To disconnect from the mobile network: #ifdown wwan .
Removing the micro-SIM card
CAUTION: Removing the micro-SIM card while it is in use may cause
data loss or result in application errors.
1 Using a paper clip or SIM eject tool eject the micro-SIM card tray.
2 Remove the micro-SIM card out of the micro-SIM card tray.
3 Replace the micro-SIM card tray into the Gateway.
23
To Next Page
Loading...
Need help?
General
