Setting up your operating
system
Windows 10 LTSB
NOTE: For more information on setting up your Windows 10 LTSB
operating system, see www.dell.com/support/windows.
1 Power on the Gateway.
The Windows configuration screen appears.
2 Setup the wireless connection for your Gateway.
3 Create a local or Microsoft account.
The Windows 10 LTSB setup is complete.
Ubuntu Snappy
NOTE: For more information on setting up your Ubuntu Snappy
operating system, see www.ubuntu.com/support.
1 Power on the Gateway.
The Ubuntu Snappy configuration screen appears.
2 Setup the wireless connection for your Gateway.
3 Enter your login and password.
The Ubuntu Snappy operating system is setup.
Wind River Linux
NOTE: For more information on setting up your Wind River operating
system, see http://www.windriver.com/support.
1 Power on the Gateway.
The Wind River splash screen is displayed after the Dell Edge Gateway
boots completes POST.
2 The operating system will take around twenty seconds to complete the
loading process. Enter the login information.
3 Activate your Wind River operating system installation.
The Wind River operating system is setup.
24
To Next Page
Loading...
