Dell Force10 E300 - Page 53

System Boot | 53
show bootvar This command displays the current operating system boot configuration
parameters.
show bootflash This command displays information about the current boot ROM.
Command Purpose (continued)
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
boot device : flash
file name : /FTOS-EF-6.1.x.y.bin
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
==========================================
No Operating System boot parameters specified!
BOOT_USER # show bootflash
GENERAL BOOTFLASH INFO
======================
Bootflash Partition A:
Force10 Networks System Boot
Copyright 1999-2004 Force10 Networks, Inc.
ROM Header Version 1.0
Official CP_IMG_BOOT, BSP Release 2.4.0.14
Created Fri Nov 5 18:22:47 US/Pacific 2004
Bootflash Partition B:
Force10 Networks System Boot
Copyright 1999-2004 Force10 Networks, Inc.
ROM Header Version 1.0