Dell Force10 E300 - D System Specifications; Chassis Physical Design

System Specifications | 59
D
System Specifications
The major sections in this appendix are:
• Chassis Physical Design
• Environmental Parameters on page 60
• Power Supplies System Power Requirements on page 60
• Module Power Requirements on page 61
• Agency Compliance on page 61
• Product Recycling and Disposal on page 63
Chassis Physical Design
Parameter Specifications
Height 14 inches (35.6 cm)
Width 17.4 inches (44.2 cm)
Depth (including cable management brackets) 24 inches (61 cm)
Chassis weight with factory-installed components (backplane
and air filter)
90 pounds (approx.) (41 kg)
Weight fully loaded (backplane, air filter, 1 fan tray, 2 SFMs,
2 RPMs, and 6 line cards
170 pounds (approx.) (77 kg)
Mounting Integral rack mount strips for front mounting in a standard
19-inch rack.
Optional brackets for center mounting in a standard 19-inch
and 23-inch rack or cabinet.
Optional brackets for front mounting in a 23-inch rack or
cabinet.
Rack clearance required Front: 18-inches (46 cm)
Rear: 20-inches (51 cm)
Thermal output:
• Maximum for fully loaded chassis 2500 W (8500 BTU/hour)
• Normal operating conditions (25 deg.C, -48V-line) 2000 W (6800 BTU/hour)
• Minimum for chassis with one 24-port 1GE line card 800 W (2700 BTU/hour)