22 Installing and Configuring the Switch
. set up the initial SNMP version 2 account now.
. return later and set up other SNMP accounts. (For
more information on setting up an SNMP version 1 or 3
account, see the user documentation).
Would you like to set up the SNMP management interface
now? [Y/N] y
To set up the SNMP management account you must specify
the management system IP address and the "community
string". The wizard automatically assigns read/write
privilege to this account. You can use Dell Network
Manager or other management interfaces to change this
setting, and to add additional management system
information later. For more information on adding
management systems, see the user documentation.
To add a management station:
Please enter the SNMP community string to be used.
[public]: mxl1
Please enter the IP address of the Management System
(A.B.C.D) or wildcard (0.0.0.0) to manage from any
Management Station. [0.0.0.0]: 1.1.1.1
Now we need to set up your initial privilege (Level
15) user account. This account is used to login to the
CLI and Web interface. You may set up other accounts
and change privilege levels later. For more
information on setting up user accounts and changing
privilege levels, see the user documentation.
To set up a user account:
Please enter the user name [admin]: root
Please enter the user password: ******
Please reenter the user password: ******
To Next Page
Loading...
