Dell Force10 Z9000 - Page 14

14 | The Z9000 System
www.dell.com | support.dell.com
Table 2-4. Port LED Displays
Feature
Description
QSFP+ Port LED Link LED:
• Green—Link up on this port
When the QSFP+ ports are operating in 40G mode, the left-most LED is lit.
When the ports are operating in 4x10G mode, only the LEDs associated with an active
port are lit.
• Blinking Green—Activity, transmitting, or receiving packet at this port
• Off—No link
Management (Ethernet) Port
LEDs
Link LED (right side of the port):
• Green—Link up at 1G speed
• Amber—Link up at 100M or 10M speed
• Off—No link
Activity LED (left side of the port):
• Blinking Green—Activity, transmitting, or receiving packet at this port
• Off—No traffic