Dell Inspiron 14 5000 - Replacing the Display Hinges; Procedure; Post-Requisites

GUID-E3D5A4DB-BAB5-4F6F-B7B6-8BC4EF0CC57D
Replacing the display hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-44BC3AFC-CB75-421C-B1E8-2BE321BFF408
Procedure
1 Align the screw holes on the display hinges with the screw holes on the display
back-cover.
2 Replace the screws that secure the display hinges to the display back-cover.
GUID-7C8D73E1-451B-43F8-8160-276E630EF867
Post-requisites
1 Replace the display panel.
2 Replace the display bezel.
3 Replace the display assembly.
4 Replace the system board.
5 Replace the I/O board.
6 Replace the heat-sink assembly.
7 Replace the computer base.
8 Replace the keyboard.
9 Replace the wireless card.
10 Follow the procedure from step 5 to step 7 in “Replacing the hard drive”.
11 Replace the memory modules.
12 Replace the optical drive.
101