Dell Inspiron 14 5000 - Replacing the Display Assembly; Procedure; Post-Requisites

GUID-2DF70EB1-9D26-4051-8B7C-FB14A89925D8
Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-D58E33B9-3AEA-4FFA-99A0-8EB81E6205C7
Procedure
1 Place the palm rest at the edge of the table with the speakers facing away from
the edge.
2 Align the screw holes on the palm-rest assembly with the screw holes on the
display hinges.
3 Replace the screws that secure the display hinges to the palm-rest assembly.
4 Route the antenna cables through its routing guides on the palm-rest assembly.
5 Route the display cable through its routing guides on the palm-rest assembly.
GUID-1E9DC9F1-55D8-4679-9922-A95E36C45AA2
Post-requisites
1 Replace the system board.
2 Replace the I/O board.
3 Replace the heat-sink assembly.
4 Replace the computer base.
5 Replace the keyboard.
6 Replace the wireless card.
7 Follow the procedure from step 5 to step 7 in “Replacing the hard drive”.
8 Replace the memory modules.
81