Dell Inspiron 14 5000 - Removing the I;O Board; Prerequisites; Procedure

GUID-DC61C8F1-86D0-49DE-B8D8-229750E714D6
Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-665224D1-DB48-4C4C-9A04-EAF518114940
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Remove the optical drive.
4 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
5 Remove the wireless card.
6 Remove the keyboard.
7 Remove the computer base.
GUID-24A82D4B-190D-49C5-9F6C-C3A917235684
Procedure
1 Remove the screw that secures the I/O board to the palm-rest assembly.
2 Lift the I/O board and turn it over.
3 Open the latch and disconnect the I/O-board cable from the I/O board.
56