GUID-35D5032D-9652-403C-9A8A-F98FFABA8776
Removing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
GUID-3A5B5686-B6B7-42E5-BE56-E41783FEF06F
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Remove the optical drive.
4 Remove the memory modules.
5 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
6 Remove the wireless card.
7 Remove the keyboard.
8 Remove the computer base.
9 Remove the heat-sink assembly.
10 Remove the I/O board.
11 Remove the system board.
GUID-5C6F8E07-5644-4F34-84AA-0876C224407E
Procedure
1 Note the power-adapter-port cable routing and remove the cable from its routing
guides on the palm-rest assembly.
66
To Next Page
Loading...
