Dell Inspiron 14 5000 - Replacing the Display Cable; Procedure; Post-Requisites

GUID-57172914-AB24-4DCE-BD70-0967C1E82776
Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-FC223948-30F8-4084-8B04-F600AC7A77ED
Procedure
1 Route the display cable through the routing guides on the display back-cover.
2 Connect the camera cable to the camera.
3 Adhere the tape that secures the camera cable to the display back-cover.
GUID-46309FD5-5AE7-4EB5-94E1-972CCB251104
Post-requisites
1 Replace the display hinges.
2 Replace the display panel.
3 Replace the display bezel.
4 Replace the display assembly.
5 Replace the system board.
6 Replace the I/O board.
7 Replace the heat-sink assembly.
8 Replace the computer base.
9 Replace the keyboard.
10 Replace the wireless card.
11 Follow the procedure from step 5 to step 7 in “Replacing the hard drive”.
12 Replace the memory modules.
105