Dell Inspiron 14 5000 - Replacing the Power-Button Board; Procedure; Post-Requisites

GUID-FBA68EE4-1E13-4F28-9B84-362694B97060
Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
GUID-F760289F-174A-473F-AB01-8B9B47C80F6D
Procedure
1 Align the screw hole on the power-button board with the screw hole on the
palm-rest assembly.
2 Adhere the tape on the power-button board.
3 Replace the screw that secures the power-button board to the palm-rest
assembly.
GUID-415B643A-3242-49FB-ABB2-5DCF86D21855
Post-requisites
1 Replace the system board.
2 Replace the I/O board.
3 Replace the heat-sink assembly.
4 Replace the computer base.
5 Replace the keyboard.
6 Replace the wireless card.
7 Follow the procedure from step 5 to step 7 in “Replacing the hard drive”.
8 Replace the memory modules.
9 Replace the optical drive.
72