GUID-2850CA15-9CEF-415A-ADAA-1614E65C491B
Removing the display back-cover
and antenna assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
GUID-DE42C8B9-87C3-4326-83F7-8E25CD12799E
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Remove the optical drive.
4 Remove the memory modules.
5 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
6 Remove the wireless card.
7 Remove the keyboard.
8 Remove the computer base.
9 Remove the heat-sink assembly.
10 Remove the I/O board.
11 Remove the system board.
12 Remove the display assembly.
13 Remove the display bezel.
14 Remove the camera.
15 Remove the display panel.
16 Remove the display cable.
107
To Next Page
Loading...
