Dell Inspiron 14 5000 - Replacing the Power-Adapter Port; Procedure; Post-Requisites

GUID-A99140DB-7AF3-4218-B305-532FF94DF51D
Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
GUID-BF398AE8-203B-4595-87BC-1108ADEDA2CA
Procedure
1 Place the power-adapter port into the slot on the palm-rest assembly.
2 Route the power-adapter port cable through its routing guides on the palm-rest
assembly.
3 Replace the screw that secures the power-adapter port to the palm-rest
assembly.
GUID-71BAAC1F-AD36-426F-A833-770D230F4A54
Post-requisites
1 Replace the system board.
2 Replace the I/O board.
3 Replace the heat-sink assembly.
4 Replace the computer base.
5 Replace the keyboard.
6 Replace the wireless card.
7 Follow the procedure from step 5 to step 7 in “Replacing the hard drive”.
8 Replace the memory modules.
9 Replace the optical drive.
68