GUID-1FB16E7C-AF0C-4FA0-8736-EAD91D8969A8
Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-173A4BBC-1988-42AF-BD63-CD0857B8BE3D
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Remove the optical drive.
4 Remove the memory modules.
5 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
6 Remove the wireless card.
7 Remove the keyboard.
8 Remove the computer base.
9 Remove the heat-sink assembly.
10 Remove the I/O board.
11 Remove the system board.
12 Remove the display assembly.
13 Remove the display bezel.
GUID-DB4D3A49-E9B3-42CA-95FE-A0696ABAA4FE
Procedure
1 Disconnect the camera cable from the camera.
90