GUID-690FF12D-2581-4326-8270-C4B813388FD3
Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
GUID-5C0CEC57-CE59-47A8-8B91-F60577ECC0C9
Procedure
1 Align the camera to the slot on the display back-cover and adhere the camera in
place.
2 Connect the camera cable to the camera.
GUID-CB0B4DC7-6509-4B96-9A3D-BF4A688DD310
Post-requisites
1 Replace the display bezel.
2 Replace the display assembly.
3 Replace the system board.
4 Replace the I/O board.
5 Replace the heat-sink assembly.
6 Replace the computer base.
7 Replace the keyboard.
8 Replace the wireless card.
9 Follow the procedure from step 5 to step 7 in “Replacing the hard drive”.
10 Replace the memory modules.
11 Replace the optical drive.
12 Replace the base cover.
92
To Next Page
Loading...
