Removing the wireless card
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Remove the screw (M2x3) that secures the wireless-card bracket to the wireless card and palm-rest assembly.
2. Remove the wireless-card bracket and disconnect the antenna cables from the wireless card.
3. Slide and remove the wireless card from the wireless-card slot.
Figure 13. Removing the wireless card
1.
screw 2. wireless-card bracket
3. wireless-card slot 4. wireless card
15
Removing the wireless card 31
To Next Page
Loading...
