Removing the palm rest
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Remove the coin-cell battery.
5. Remove the solid-state drive/Intel Optane memory module.
6. Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
7. Remove the wireless card.
8. Remove the fan.
9. Remove the status-light board.
10. Remove the touch pad.
11. Remove the display assembly.
12. Remove the graphics daughter-board.
13. Remove the heat sink.
14. Remove the I/O board.
15. Remove the keyboard.
16. Remove the power-adapter port.
17. Remove the power and volume-buttons board.
18. Remove the speakers.
19. Remove the system board.
Procedure
After performing the steps in prerequisites we are left with the palm rest.
41
70 Removing the palm rest
To Next Page
Loading...
