Removing the camera
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
4. Remove the display assembly.
5. Follow the procedure from step 1 to step 4 in “Removing the display panel”.
Procedure
1. Using a plastic scribe, gently pry the camera module off the display-panel assembly.
2. Turn the camera module over.
3. Disconnect the camera cable from the camera module.
Figure 39. Removing the camera
1.
display-panel assembly 2. plastic scribe
3. camera module 4. camera cable
47
78 Removing the camera
To Next Page
Loading...
