Dell Inspiron 17 7000 - Chapter 27: Removing the Power-Adapter Port; Prerequisites; Procedure

Removing the power-adapter port
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Disconnect the power-adapter port cable from the system board.
2. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
3. Lift the power-adapter port off the palm-rest assembly.
Figure 21. Removing the power-adapter port
1.
power-adapter port cable 2. screw
3. power-adapter port 4. palm-rest assembly
27
Removing the power-adapter port 47