Replacing the palm rest
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
Place the palm rest on a flat surface.
Post-requisites
1. Replace the system board.
2. Replace the speakers.
3. Replace the power and volume-buttons board.
4. Replace the power-adapter port.
5. Replace the keyboard.
6. Replace the I/O board.
7. Replace the heat sink.
8. Replace the graphics daughter-board.
9. Replace the display assembly.
10. Replace the touch pad.
11. Replace the status-light board.
12. Replace the fan.
13. Replace the wireless card.
14. Follow the procedure from step 4 to step 6 in “Replacing the hard drive”.
15. Replace the solid-state drive/Intel Optane memory module.
16. Replace the coin-cell battery.
17. Replace the memory modules.
18. Replace the battery.
19. Replace the base cover.
42
72 Replacing the palm rest
To Next Page
Loading...
