Removing the display back-cover and
antenna assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
4. Remove the display assembly.
5. Follow the procedure from step 1 to step 3 in “Removing the display panel”.
Procedure
After performing all the prerequisites, we are left with the display back-cover and antenna assembly.
Figure 38. Display back-cover and antenna assembly
1. display back-cover and antenna assembly
45
76 Removing the display back-cover and antenna assembly
To Next Page
Loading...
