Replacing the display cable
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Slide the display cable into their respective connectors on the display-panel assembly and sensor board and close the latches
to secure the cable.
2. Adhere the tapes that secure the display cable to the display-panel assembly and sensor board.
Post-requisites
1. Follow the procedure from step 6 to step 8 in “Replacing the display panel”.
2. Replace the display assembly.
3. Replace the wireless card.
4. Replace the battery.
5. Replace the base cover.
52
Replacing the display cable 85
To Next Page
Loading...
