Replacing the display back-cover and
antenna assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
Place the display back-cover and antenna assembly on a flat surface.
Post-requisites
1. Follow the procedure from step 6 to step 8 in “Replacing the display panel”.
2. Replace the display assembly.
3. Replace the wireless card.
4. Replace the battery.
5. Replace the base cover.
46
Replacing the display back-cover and antenna assembly 77
To Next Page
Loading...
