Table 4. System setup options—Advanced menu
Advanced
Advanced BIOS Features
Intel(R)SpeedStep(TM) Enable or disable the Intel SpeedStep feature.
Default: Enabled.
Integrated NIC Enable or disable the on-board LAN controller.
Default: Enabled
Intel Speed Shift Technology Enable/disable Intel Speed Shift Technology support . Setting this
option to enable to allows the operating system to select the
appropriate processor performance automatically.
Default: Enabled
SATA Option
This option configures the operating mode of the integrated SATA
hard drive controller.
Default: AHCI
Adapter Warnings
Enables or disables the power adapter warnings.
Default: Enabled
Intel Software Guard Extensions
Enable/Disable/Software Controlled Intel® Software Guard
Extensions (SGX).
Default: Software controlled
Intel Software Guard Extensions allocated memory size
Setting memory allocation for Intel Software Guard Extensions
(SGX). The support would be 128MB allocation by default. When
SGX is set to Software Controlled this setting is not available and
has no effect.
BIOS Recovery from Hard Drive
Enable or disable BIOS recovery from hard drive.
Default: Enabled
BIOS Auto-Recovery Enable or disable BIOS Auto-Recovery.
Default :Disabled
Integrity Check When enabled, BIOS checks the BIOS image integrity on every
boot. When Disabled, BIOS checks the image integrity only if the
previous boot did not complete.
Default :Disabled
Intel BIOS Guard Support
Enable or disable the Intel BIOS Guard Support.
Default: Enabled
USB Configuration
Rear USB Ports Allows you to enable or disable the rear USB ports.
Power Options
Wake Up by Integrated LAN Enable or disable the computer to be powered on by special LAN
signals.
Default: Disabled
AC Recovery Sets what action the computer takes when power is restored.
Deep Sleep Control Enable or disable the Deep Sleep mode support.
Default: Enabled
USB Wake support Enable or disable USB devices to wake the system from Standby.
80 System setup
To Next Page
Loading...
