Advanced
Default: Enabled
USB Powershare Support State
Enable or disable charging USB devices.
Default: Disabled
Auto Power On
This option sets the time of day when you would like the system to
turn on automatically.
Auto Power On Mode
System turns on automatically.
Auto Power On Date
Auto power on date.
Auto Power On Time
Auto power on time.
Numlock Key Allows you to set the status of the Numlock key during boot to On
or Off.
SupportAssist System Resolution
Auto OS Recovery Threshold Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
SupportAssist OS Recovery
The SupportAssist OS Recovery option will enable or disable the
boot flow for SupportAssist OS Recovery tool in the event of
certain system errors. If the SupportAssist OS Recovery setup
option is set to disabled then all automatic boot flow for
SupportAssist OS Recovery tool will be disabled.
Default: Disabled
Table 5. System setup options—Security menu
Security
Unlock Setup Status Displays the Unlock Setup status.
Admin Password Status Displays the administrative password status.
System Password Status Displays the system password status.
HDD Password Status Displays the hard-drive password status.
Asset Tag Displays the asset tag of your computer.
Admin Password Allows you to set the admin password.
System Password Allows you to set the system password.
HDD Password Allows you to set the hard drive password.
Password change Allows you determine whether changes to the System and Hard
Disk passwords are permitted when an administrator password
is set.
Computrance Allows you to help track assets and provide recovery services in
the event the computer is lost or stolen.
Firmware TPM Allows you to enable or disable the firmware TPM function.
PPI Bypass for Clear Command Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip BIOS
PPI user prompts when issuing the Clear command. Changes to
this setting take effect immediately..
UEFI Firmware Capsule Updates Allows you to enable or disable the UEFI Firmware Capsule
Updates function.
Default: Enabled
System setup 81
To Next Page
Loading...
