b display assembly
c DC-in cable
d WLAN card
e battery
f base cover
g micro-SD card
4 Follow the procedure in After working inside your computer.
LCD panel
Removing the LCD panel
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a micro-SD card
b base cover
c battery
d WLAN card
e DC-in cable
f display assembly
g LCD bezel
3 Remove the four M2L3 screws [1] securing the LCD panel to the LCD back cover and ip it over to rest on the palmrest [2].
4 Peel o the tape from the EDP connector [1] and open the actuator [2] to disconnect the EDP cable from the system board [3].
5 Lift the LCD panel up and away from the computer [4].
Disassembly and reassembly
111