Dell Latitude 3300 - Recommended Tools; Microsd Card; Installing the Microsd Card; Removing the Microsd Card

Component Quantity Screw type Image
• I/O Board to palmrest
• System board to Palmrest
• Mis trigger Bkt to SSD
• 1
• 1
Base cover to Palmrest 10 M2.5*8.0 Captive screws (Part of the base
cover)
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe
NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4.
microSD card
Installing the microSD card
Slide the microSD card into its slot until it clicks into place.
Removing the microSD card
1 Press in on the microSD card to release it from the computer.
2 Remove the microSD card from the computer.
Base Cover
Removing the base cover
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a micro-SD card
Disassembly and reassembly
59