Dell Latitude 3300 - Supportassist System Resolution

SupportAssist System Resolution
Table 49. SupportAssist System Resolution
Option Description
Auto OS Recovery
Threshold
The Auto OS Recovery threshold setup options controls the automatic ow for SupportAssist System
Resolution Console and for Dell OS Recovery Tool.
The options are:
• 0
• 1
• 2—Default
• 3
SupportAssist OS Recovery
The SupportAssist OS Recovery option will enable or disable the boot ow for SupportAssist OS Recovery
tool in the event of certain system errors.
This option is not set by default.
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys.
• Fn Lock—Default
Click one of the following options:
• Lock Mode Disable/Standard
• Lock Mode Enable/Secondary—Default
Fastboot
Allows you to speed up the boot process by bypassing some of the compatibility steps.
Click one of the following options:
• Minimal—Default
• Thorough
• Auto
Extended BIOS POST Time
Allows you to create an additional preboot delay.
Click one of the following options:
• 0 seconds—Default
• 5 seconds
• 10 seconds
Full Screen Logo
Allows you to display full screen logo, if your image matches screen resolution.
• Enable Full Screen Logo
This option is not set by default.
Warnings and Errors
Allows you to select dierent options to either stop, prompt and wait for user input, continue when
warnings are detected but pause on errors, or continue when either warnings or errors are detected during
the POST process.
Click one of the following options:
• Prompt on Warnings and Errors—Default
138 System setup