b Touchpad cable connector [2]
c Speaker cable connector [3]
d I/O board cable [4]
e Coin cell connector [5]
6 Install the:
a DC-in cable
b fan
c heat sink
d memory module
e SSD
f WLAN card
g battery
h base cover
i micro-SD card
7 Follow the procedure in After working inside your computer.
Palmrest
1
NOTE
: After disassembling the system board you are left with palmrest which is one complete unit.
Follow the procedure in Before working inside your computer.
2 Remove the:
a micro-SD card
b base cover
c battery
d coin cell
e WLAN card
f SSD
g speakers
h i-o daughterboard
i keyboard
124
Disassembly and reassembly
To Next Page
Loading...
