4 Route the WLAN antennae cable along the fan case onto its hook on the system board [2].
5 Install the:
a battery
b base cover
c micro-SD card
6 Follow the procedure in After working inside your computer.
WLAN Card
Removing the WLAN card
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a micro-SD card
b base cover
c battery
3 Remove the single M2xL3 screw that secures the WLAN metal bracket to the computer [1] and lift and remove the metal bracket o
the WLAN card [2].
4 Disconnect the two antenna cables [3] and remove the WLAN card from M.2 connector on the system board [4].
Disassembly and reassembly
99