Option Description
UEFI Boot Path Security
Allows you to control whether the system prompts the user to enter
the Admin password when booting to a UEFI boot path.
Click one of the following options:
• Always, Except Internal HDD—Default
• Always
• Never
Date/Time
Allows you to set the date and time. The change to the system date
and time takes eect immediately.
System conguration
Table 37. System Conguration
Option Description
Integrated NIC
Allows you to congure the integrated network controller.
Click one of the following options:
• Disabled
• Enabled
• Enabled w/PXE—Default
SATA Operation
Allows you to congure the operating mode of the integrated SATA
hard-drive controller.
Click one of the following options:
• Disabled
• AHCI
• RAID On—Default
NOTE: SATA is congured to support RAID
mode.
SMART Reporting
This eld controls whether hard drive errors for integrated drives
are reported during system startup. This technology is part of the
S.M.A.R.T (Self Monitoring Analysis and Reporting Technology)
specication. This option is disabled by default.
• Enable SMART Reporting
Drives
These elds let you enable or disable various drives on board.
The options are:
• SATA-0
• M.2 PCIe SSD-0
SMART Reporting
This eld controls whether hard drive errors for integrated drives
are reported during startup.
The option is disabled by default.
128 System setup