a Remove the M2xL3 screw that secures the WLAN metal bracket to the system [1].
b Lift and remove the metal bracket o the WLAN card [2].
c Disconnect the two WLAN cables that connect the WLAN card to the antenna [3].
d Pull out the WLAN card from its connector on the system board [4].
Installing WLAN card
1 Insert the WLAN card into its connector on the system board.
2 Connect the two antenna cables to the WLAN card.
3 Replace the metal bracket on the WLAN.
4 Tighten the M2xL3 screw to secure the WLAN card and bracket to the system board.
5 Install the:
a battery
b base cover
c microSD card
6 Follow the procedure in After working inside your computer.
Memory Module
Removing the memory module
1 Follow the procedure in Before working inside your computer.
2 Remove the:
16
Removing and installing components
To Next Page
Loading...
