Installing the system board
1 Align the system board with the screw holders on the computer.
2 Tighten the M2xL3 screws to secure the system board to the computer.
3 Connect the audio board; audio board cable tape, speaker cable, HDD cable, touchpad cable, coin cell battery cable, and the keyboard
cables to their respective connectors.
4 Connect the display cable to the connector.
5 Place the metal bracket over the connector and tighten the M2xL3 screw to secure the display cable to the computer.
6 Install the:
a DCin
b fan
c heat sink
d memory module
e WLAN card
f battery
g base cover
h microSD card
7 Follow the procedure in After working inside your computer.
34
Removing and installing components
To Next Page
Loading...
