Installing DC-in port
1 Place the DC-in port in the computer.
2 Tighten the M2.5xL5 screw of the hinge to secure port.
3 Connect the DC-in cable to the system board.
4 Install the:
a battery
b base cover
c microSD card
5 Follow the procedure in After working inside your computer.
Audio board
Removing the audio board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a microSD card
b base cover
c battery
3 To remove the audio board:
a Disconnect the audio board cable from its connector on the system board [1]
Removing and installing components
25
To Next Page
Loading...
