Installing SSD module
1. Insert the SSD module into the connector on the system board.
2. Install the SSD shield on the SSD module.
CAUTION:
Align the five clips heads into the system board clips holes, to install the shield properly. Ensure
to insert the clips with caution, as the clips are small and delicate. Mishandling damages the clips head and
needs replacing the shield.
3. Replace the M2.0 x 2.5 screw to secure SSD shield.
NOTE: Align the shield carefully to avoid damage to the clips heads.
4. Install the:
a. Display panel
b. uSIM/microSD
Micro-SIM card is installed only on tablets shipped with WWAN module.
5. Follow the procedure in after working inside your tablet.
WLAN card
Removing the WLAN card
1. Follow the procedure in Before working inside your tablet.
Using your tablet
21
To Next Page
Loading...
